Car protection breathable
Car inverter and power supply unit
Solution
Components of auto motors have drawn more and more designers’attention, especially the sealed and high powered ones with temperature rising and heating when they are working or the temperature changes of the environment. They are coming up with the solutions for enclosure for problems like:how to cope with the rapid change of temperature after thechange of working status, bad air tightness, crack or short service life, increase of maintenance cost.
1、With longer the working time, the higher temperature raised, but the worst performance for a sealed enclosure;
2、Bad air tightness of the non-vacuum components after temperature rapidly rose within limited space;
3、It accelerates the aging of the equipment, shortens the service life and increase the cost of maintenance。
Provide a variety of waterproof breathable protection solutions:
Voir’s solution in protective vent:
1、Resistance of liquid, contamination and particles stops corrosion or oxidation from happening to inverter and other components;
2、Efficiently lower down the friction caused by accumulation of particle and make it easier to drive the inverter;
3、To rapidly and consistently adjust the pressure according to environmental pressure and temperature;
4、Consistently venting and balancing the pressure to maintain the IP rate for the power source。
Products
Product Model
|
Material/Size/Colour
|
Product Performance
|
VV-MOCM04P1A-F07N
|
brass
M4*0.7
brass
|
IP:IP65-68
A/P:151.5ml/min@△p=7Kpa
WIP:>-12Kpa
T:-40-125℃
|
VV-POVSK5P3A-H353
|
PC
SK5
black
|
IP:IP67
A/P:179ml/min@△p=1.25mbar
WIP:>40Kpa
T:-40-125℃
|
VV-POVSK5P2A-H156/H356
|
PA66+GF20
SK5
black/gray
|
IP:IP67
A/P:179ml/min@△p=1.25mbar
WIP:≥-40Kpa
T:-40-125℃
|
VV-POVM12P3A-B30B
|
PC
M12*1.5
black
|
IP:IP68
A/P:≥900ml/min@△p=7Kpa
WIP:40Kpa
T:-40-125℃
|
BA welded type
BAE Back glue type
|
PTFE
user-defined
white/black/yellow
|
IP:IP65-68
A/P:72-256ml/min@p=1.25mbar
WIP:-120mbar(>1M)
T:-40-150℃
|
Peculiarity
1、Resistance of liquid, contamination and particles stops corrosion or oxidation from happening to inverter and other components;
2、Efficiently lower down the friction caused by accumulation of particle and make it easier to drive the inverter;
3、To rapidly and consistently adjust the pressure according to environmental pressure and temperature;
4、Consistently venting and balancing the pressure to maintain the IP rate for the power source。
Installation
Straight-through hole and nut: Suitable for thin-wall shell |
Internal thread installation: Suitable for thick-wall shell |
Clip-on installation: Suitable for thin-wall shell |
Plug-in installation: Suitable for straight-through hole |
Adhesive Surface-mount 1: On inner surface of shell |
Adhesive Surface-mount 2: On outer surface of shell with counterbore |
|
|
|
|
|
|
Threaded Product |
Threaded Product |
Clip-on Product |
Plug-in Product |
Adhesive Product BAE (L/P) |
Adhesive Product BAE /P |
Advantage
- VOIR® has established partnership with many auto parts or finished automobile manufacturers,strict tests or trial use under hostile conditions prove the products are reliable and durable.
- VOIR® leading simulation testing system enables it to provide the products.
- VOIR® will offer different solutions according to highlights of application conditions of autoparts.
- Contact us for more information